SBC8600B Rev2.0

Description

1 Overview:

EMTOP has designed a single board computer SBC8600B REV2.0, including system On Module Board Mini8600b Rev2.0. The flexible design allows the fast and easy way of realizing and upgrading the controller’s capabilities. In additional to those features offered by Mini8600B REV2.0, the baseboard SBC8600B REV2.0 features 5 serial ports (including 2 RS232 and 3 TTL), 2 USB Host and 1 USB OTG, 2 Ethernet ports, CAN, RS485, LCD, Touch screen, Audio, ADC and more other peripherals. The SBC8600B Rev2.0 is a ready-to-run platform to support for Linux 3.2.0, Android 4.0 and WinCE 7 operating systems.(No support WinCE for industrial version).

2 On Board Mini8600b Rev2.0  Hardware Features:

  Processor/Memory:

• TI AM3358 ARM Cortex-A8 microprocessor

– 1GHz ARM Cortex-A8 32-bit RISC MPU

–  NEON SIMD coprocessor for accelerated multimedia/dsp operations

– 32KB/32KB of L1 Instruction/Data Cache with Single-Error Detection (parity)

– 256KB of L2 Cache with Error Correcting Code (ECC)

– SGX530 Graphics Engine

– Programmable Real-Time Unit Subsystem

• 2*256MByte DDR3 SDRAM
• 512MByte NAND Flash

 Expansion Interfaces and Signals Routed to Pins:

• Two 0.4mm space 2*40-pin board-to-board male expansion connectors
• TFT LCD Interface (support 24-bpp parallel RGB Interface LCD)
• 2 * USB 2.0 OTG Ports With Integrated PHY, High-Speed
• 3 * inter-integrated circuit (I2C) Bus interfaces
• 6 * UART interfaces;
• 1 * SPI interface;
• Two 10/100/1000 Mb/s Ethernet MAC (EMAC) with Management Data Input/Output
• (MDIO) module;
• A multichannel audio serial ports (McASP);
• 8-channel 12-bit ADC interfaces;
• Two 4-line SD/MMC card interfaces;
• GPMC bus

 Electrical Features:

• Dimensions: 60.0 mm x 27.0 mm
• PCB Layers: 8 layers
• Temperature: 0~70 Celsius ( commerial )-40 ~ 85 Celsius（industrial）
• Humidity Range: 20% ~ 90%
• Input Voltage: 3.3V

3 SBC8600B Rev2.0  Hardware Interface Features:

EMTOP SOM-AM335x-MM (Part NO: Mini8600B REV2.0) CPU Module is connected to the carrier board via two 0.4mm space 2*40-pin board-to-board male expansion connectors.

Data transfer interface:

• Two 10/100/1000Mbps Ethernet interfaces (only one network port is supported in WinCE 7 system at this time)
• A CAN 2.0 interface and an RS485 interface (8 Pin Phoenix Terminal Connector)
• A USB 2.0 High-Speed OTG Portswith Integrated PHY (480Mbps, Mini USB interface)
• Two USB 2.0 High-Speed HOST Portswith Integrated PHY (480Mbps, USB-A interface)
• A TF card interface (SD/MMC compatible, 3.3V logic)

Serial port:

• UART0, RS232 level, DB9 debug serial port
• UART2, RS232 Level, DB9 Common Serial Port
• UART3, 3.3V TTL level, needle alignment
• UART4, TTL level, needle alignment
• UART5, TTL level, needle alignment

Audio/video interface:

• LCD/touch screen interface (24-bit data RGB full color output, 50-pin FPC connector)
• An audio input interface (3.5mm audio interface)
• A dual channel audio output interface (3.5mm audio interface)

Transport interface:

• Two custom keys (MENU, BACK)
• A reset key

 LED：

• A power indicator
• Two user defined lights

Electrical characteristics:

• Working temperature: 0 ° C ~ 70 ° C
• Ambient temperature: 20% – 90%, non condensing
• Mechanical dimension: 96mm x 96m
• Input voltage: 12V

4 Software Features:

Applications:

• Intelligent Display Terminal
• Medical Equipment
• Smart Appliances
• Alternative Energy Device
• Intelligent Display Terminal
• Blood analyzer
• Robotic Arm
• Charging Station