Sale!
Mini8600B Rev2.0
Mini8600B Rev2.0 - Image 2
Mini8600B Rev2.0 - Image 3
Mini8600B Rev2.0 - Image 4

Mini8600B Rev2.0

Original price was: $79.00.Current price is: $69.00.

Features:

  • CPU:TI AM3358 ARM Cortex-A8 microprocessor
  • DDR3L:512MB
  • Storage:512MB
  • OS:Linux3.2,Linux4.1

Github: https://github.com/EMTOP-TECH/MINI8600B

 

Datasheet

UserManual

Schematic

1000 in stock

Quantity Discount (%) Price
1 - 99 — $69.00
100 - 299 2.9 % $67.00
300 - 499 8.7 % $63.00
500 - 999 14.49 % $59.00
1,000+ 18.84 % $56.00
x
Categories: , SKU: Mini8600BV2

Description

Overview:

Measuring 60mm by 27mm, a controller board based on TI’s Sitara AM3358 ARM Cortex-A8 high performance processor. The tiny module integrates 2*256MBytes DDR3 SDRAM and 512Mbytes NAND Flash, and uses two 0.4mm space 2*40-pin board-toboard male expansion connectors.

Top-view of SOM-AM335x-MM (Part NO: Mini8600B Rev2.0) CPU Module

Bottom-view of SOM-AM335x-MM (Part NO:Mini8600B Rev2.0) CPU Module

 

EMTOP has designed a single board computer MINI8600B REV2.0 with standard baseboard SBC8600B REV2.0 which has an expansion board to carry the  Mini8600B REV2.0. The flexible design allows the fast and easy way of realizing and upgrading the controller’s capabilities. In additional to those features offered by  Mini8600B REV2.0, the  Mini8600B REV2.0 with standard baseboard SBC8600B REV2.0 features 5 serial ports (including 2 RS232 and 3 TTL), 2 USB Host and 1 USB OTG, 2 Ethernet ports, CAN, RS485, LCD, Touch screen, Audio, ADC and more other peripherals. The SBC8600B Rev2.0 is a ready-to-run platform to support for Linux 3.2.0, WinCE 7 operating systems.(No support WinCE for industrial version). Mini8600b rev2.0 with standard baseboard SBC8600B REV2.0

 

 System block diagram:

SOM-AM335x-MM

Dimension:

SOM-AM335x-MM

 

Hardware Features:

  Processor/Memory:

  • TI AM3358 ARM Cortex-A8 microprocessor

    – 1GHz ARM Cortex-A8 32-bit RISC MPU

    –  NEON SIMD coprocessor for accelerated multimedia/dsp operations

    – 32KB/32KB of L1 Instruction/Data Cache with Single-Error Detection (parity)

    – 256KB of L2 Cache with Error Correcting Code (ECC)

    – SGX530 Graphics Engine

    – Programmable Real-Time Unit Subsystem

  • 2*256MByte DDR3 SDRAM
  • 512MByte NAND Flash

 Expansion Interfaces and Signals Routed to Pins:

  • Two 0.4mm space 2*40-pin board-to-board male expansion connectors
  • TFT LCD Interface (support 24-bpp parallel RGB Interface LCD)
  • 2 * USB 2.0 OTG Ports With Integrated PHY, High-Speed
  • 3 * inter-integrated circuit (I2C) Bus interfaces
  • 6 * UART interfaces;
  • 1 * SPI interface;
  • Two 10/100/1000 Mb/s Ethernet MAC (EMAC) with Management Data Input/Output
  • (MDIO) module;
  • A multichannel audio serial ports (McASP);
  • 8-channel 12-bit ADC interfaces;
  • Two 4-line SD/MMC card interfaces;
  • GPMC bus

 Electrical Features:

  • Dimensions: 60.0 mm x 27.0 mm
  • PCB Layers: 8 layers
  • Temperature: 0~70 Celsius ( commerial )

    -40 ~ 85 Celsius（industrial）

  • Humidity Range: 20% ~ 90%
  • Input Voltage: 3.3V

EMTOP SOM-AM335x-MM (Part NO: Mini8600B REV2.0) CPU Module is connected to the carrier board via two 0.4mm space 2*40-pin board-to-board male expansion connectors.

 

The connector marked in red below is CN1; table 1-1 described the pin signals of CN1 connector.

SOM-AM335x-MM

CN1
Pin Signal Description
1 GND GND
2 VDDS_RTC Supply voltage for RTC
3 CLK_OUT1 Clock out1
4 CLK_OUT2 Clock out2
5 MMC0_DAT0 MMC0 data bus
6 MMC0_DAT1 MMC0 data bus
7 MMC0_DAT2 MMC0 data bus
8 GLOBLE_RESETN SYS_RESET IN/ OUTPUT
9 MMC0_DAT3 MMC0 data bus
10 AM335X_PWRON_RESETN CPU PWRON Reset
11 GND GND
12 GND GND
13 AM355X_PRU_UART0_CTS PRU UART0 Clear To Send
14 AM355X_PRU_UART0_RX PRU UART0 receive data
15 AM355X_PRU_UART0_RTS PRU UART0 request to send
16 AM355X_PRU_UART0_TX PRU UART0 transmit data
17 AM355X_UART0_RX UART0 receive data
18 AM355X_UART3_RX UART3 receive data
19 AM355X_UART0_TX UART0 transmit data
20 AM355X_UART3_TX UART3 transmit data
21 AM355X_CAN0_RX CAN0 receive data
22 AM355X_I2C0_SDA I2C0 master serial data
23 AM355X_CAN0_TX CAN0 transmit data
24 AM355X_I2C0_SCL I2C0 master serial clock
25 AM355X_UART4_RX UART4 receive data
26 AM355X_UART1_RX UART1 receive data
27 AM355X_UART4_TX UART4 transmit data
28 AM355X_UART1_TX UART1 transmit data
29 GND GND
30 GND GND
31 MII1_COL  MII1 collision detect
32 AM355X_USB0_DRVVBUS USB0 controller VBUS control output
33 MII1_TX_CLK MII1 transmit clock
34 AM355X_USB1_DRVVBUS USB1 controller VBUS control output
35 MII1_TX_EN MII1 transmit enable
36 MII1_REF_CLK MII1 reference clock
37 MII1_TXD3 MII1 transmit data
38 MII1_CRS MII1 carrier sense
39 MII1_TXD2 MII1 transmit data
40 MII1_RX_ER MII1 receive data error
41 MII1_TXD1 MII1 transmit data
42 MII1_RX_DV MII1 receive data valid
43 MII1_TXD0 MII1 transmit data
44 MII1_RX_CLK MII1 receive clock
45 MII_MDIO MII MDIO DATA
46 MII1_RXD3 MII1 receive data
47 MII_MDC MII MDIO CLK
48 MII1_RXD2 MII1 receive data
49 GND GND
50 MII1_RXD1 MII1 receive data
51 AM355X_USB0_DM USB0 DM-
52 MII1_RXD0 MII1 receive data
53 AM355X_USB0_DP USB0 DP
54 MMC0_CMD MMC0 Command Signal
55 GND GND
56 USB0_VBUS USB0 bus voltage
57 AM355X_USB1_DM USB1 data-
58 AM355X_USB1_ID USB1 ID
59 AM355X_USB1_DP USB1 data+
60 AM355X_USB0_ID USB0 ID
61 GND GND
62 USB1_VBUS USB1 bus voltage
63 GPMC_A0 GPMC address
64 GPMC_A7 GPMC address
65 GPMC_A5 GPMC address
66 GPMC_A11 GPMC address
67 GPMC_A4 GPMC address
68 GPMC_A10 GPMC address
69 GPMC_A3 GPMC address
70 GPMC_A9 GPMC address
71 GPMC_A2 GPMC address
72 GPMC_A8 GPMC address
73 GPMC_A6 GPMC address
74 GPMC_A1 GPMC address
75 GND GND
76 GND GND
77 VDD_3V3 Power
78 VDD_3V3 Power
79 VDD_3V3 Power
80 VDD_3V3 Power

The connector marked in red below is CN2; table 1-2 described the pin signals of CN2 connector.

SOM-AM335x-MM

CN2
Pin Signal Description
1 GND GND
2 GND GND
3 MCASP0_AHCLKX MCASP0 transmit master clock
4 MCASP0_ACLKX MCASP0 transmit bit clock
5 MCASP0_FSX MCASP0 transmit frame sync
6 MCASP0_AXR0 MCASP0 serial data(I/O)
7 MCASP0_AHCLKR MCASP0 receiver master clock
8 MMC0_CLK MMC0 clock
9 MCASP0_FSR MCASP0 receive frame sync
10 MCASP0_AXR1 MCASP0 serial data(I/O)
11 GND GND
12 GND GND
13 VDDA_ADC Supply voltage range for ADC
14 AM355X_ADC0 ADC0
15 AM355X_ADC1 ADC1
16 AM355X_ADC2 ADC2
17 AM355X_ADC3 ADC3
18 AM355X_ADC4 ADC4
19 AM355X_ADC5 ADC5
20 AM355X_ADC6 ADC6
21 AM355X_ADC7 ADC7
22 GND_ADC GND ADC
23 GND GND
24 GND GND
25 LCD_DATA1 LCD data bus
26 LCD_DATA12 LCD data bus
27 LCD_DATA0 LCD data bus
28 LCD_DATA10 LCD data bus
29 LCD_DATA5 LCD data bus
30 LCD_DATA13 LCD data bus
31 LCD_DATA4 LCD data bus
32 LCD_DATA11 LCD data bus
33 LCD_DATA6 LCD data bus
34 LCD_DATA14 LCD data bus
35 LCD_DATA8 LCD data bus
36 LCD_VSYNC LCD vertical sync
37 GND GND
38 GND GND
39 LCD_DATA9 LCD data bus
40 LCD_PCLK LCD pixel clock
41 LCD_DATA15 LCD data bus
42 GPMC_AD11 GPMC address & data
43 LCD_DATA3 LCD data bus
44 GPMC_AD15 GPMC address & data
45 LCD_DATA2 LCD data bus
46 GPMC_AD14 GPMC address & data
47 LCD_DATA7 LCD data bus
48 GPMC_WAIT0 GPMC wait0
49 LCD_HSYNC LCD horizontal sync
50 GPMC_BEN1 GPMC byte enable 1
51 GND GND
52 GND GND
53 LCD_EN LCD AC bias enable chip select
54 GPMC_WPN GPMC write protect
55 GPMC_AD13 GPMC address & data
56 GPMC_CSN3 GPMC chip select
57 GPMC_AD9 GPMC address & data
58 GPMC_CSN2 GPMC chip select
59 GPMC_AD10 GPMC address & data
60 GPMC_CLK GPMC clock
61 GPMC_AD8 GPMC address & data
62 GPMC_AD6 GPMC address & data
63 GPMC_AD12 GPMC address & data
64 GND GND
65 GND GND
66 GPMC_CSN1 GPMC chip select1
67 GPMC_ADVN_ALE GPMC address valid/address latch enable
68 GPMC_AD5 GPMC address & data
69 GPMC_BEN0_CLE GPMC byte enable 0/Command latch enable
70 GPMC_AD4 GPMC address & data
71 GPMC_OEN_REN GPMC output /read enable
72 GPMC_AD1 GPMC address & data
73 GPMC_AD2 GPMC address & data
74 GPMC_AD0 GPMC address & data
75 GPMC_AD3 GPMC address & data
76 GPMC_CSN0 GPMC chip select0
77 GPMC_AD7 GPMC address & data
78 GPMC_WEN GPMC write enable
79 GND GND
80 GND GND

Software Features:

OS Item Remark
Linux BIOS SPL
(First boot loader)		 NAND
MMC/SD
FAT
U-boot
(Second boot loader)		 NAND
MMC/SD
FAT
NET
Kernel Linux-3.2.0 Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS file systems
Driver NAND Flash, SDRAM, Serial port, RTC, Ethernet, TFT LCD, Touch screen, TF card, USB OTG, Audio input/output, LED, Key, CAN, RS485, Power Management (backlight, PWM, ADC)
(provided with source code)
2D/3D (not provided with source code)
Android Kernel Linux-3.2.0 Gingerbread
Driver NAND Flash, SDRAM, Serial port, RTC, Ethernet, TFT LCD, Touch screen, TF card, USB OTG, Audio input/output, LED, Key, Power Management (backlight, PWM)
(provided with source code)
2D/3D (not provided with source code)
WinCE7 BIOS X-loader
(First boot loader)		 NAND
MMC/SD
FAT
EBOOT
(Second boot loader)		 NAND
MMC/SD
FAT
NET
OAL OAL module Boot parameter
KILT(EMAC)
Serial debug
REBOOT
Watchdog
RTC
Kernel profiler
System timer
Interrupt controller
MMU
Driver NAND Flash, SDRAM, Serial port, RTC, Ethernet, TFT LCD, Touch screen, TF card, USB OTG, Audio input/output, LED, Key, RS485, Power Management (backlight)
(provided with source code)
CAN, 2D/3D (not provided with source code)

Applications:

  • Intelligent Display Terminal
  • Medical Equipment
  • Smart Appliances
  • Alternative Energy Device
  • Intelligent Display Terminal
  • Blood analyzer
  • Robotic Arm
  • Charging Station

 

Additional information

Featured

Catalog

CPU Arch

Memory

Operating System

Storage

Processor

Product Enquiry

Related products